Technical data
EN
5
HV1900
Socket-outlets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket-outlet!
•
DO NOT use the spray guns to spray ammable substances.
•
The spray guns are not to be cleaned with ammable solvents.
•
Caution against dangers that can arise from the sprayed substance and observe
the text and information on the containers or the specications given by the
substance manufacturer.
•
DO NOT spray any liquid of unknown hazard potential.
•
The tool shall not be used in workplaces covered by the explosion-protection
regulations.
•
To avoid the hazard of explosion when spraying, provide for eective natural or
articial ventilation.
•
There must be no sources of ignition such as, for example, open res, smoke of
lit cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc
in the vicinity during spraying.
•
Ensure that no solvent vapours are sucked in by the unit. Do not spray onto the
unit!
•
The spray gun is not a toy; children must therefore not be allowed to handle it
or play with it.
•
Before working on the spray gun remove the power plug from the socket-outlet.
•
Cover areas that are not to be sprayed. When working keep in mind that wind,
for example, may transport paint mist over great distances and cause damage.
•
DO NOT lay the spray gun down on its side.
With original accessories and spare parts, you have the guarantee that all safety
regulations are fullled.
4. Description/ Scope of delivery
Description/ Scope of delivery (Fig. 1)
1) Spray Gun Unit 2) Turbine
3) Paint Container 4) Viscosity Cup
5) Air Hose 6) Operating Manual