HEAT GUN KIT HG 2000K OPERATING INSTRUCTIONS Thank you for purchasing the Earlex HG2000K Heat Gun Kit. This is a highly versatile kit that can be used in a variety of applications. WHAT’S INCLUDED Your kit contains: 2000W heat gun 4 nozzles 3 shavehooks 1 shavehook handle 1 general purpose scraper 1 carry case BEFORE USE - PLEASE READ THE SAFETY & OPERATING INSTRUCTIONS Please retain for future reference www.earlex.co.
! PLEASE READ BEFORE USE DO NOT ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● SAFETY OPERATING INSTRUCTIONS Touch the nozzle. Change/rotate the nozzle while the unit is turned on. Leave the heat gun unattended when it is switched on. Allow children to operate or play with the heat gun. Carry the heat gun by the mains cable. Do not allow heat to be directed onto the mains cable. Use the tool as a hair dryer. Restrict any air flow from the nozzle outlet or fan inlets.
HEAT SETTINGS Nozzles The Heat Gun has two settings: 1.Low heat - for use where the workpiece or surroundings must not be allowed to get too hot. Setting~350°C. 2.High heat - for faster heat up time of the workpiece where you can also operate the gun at a greater distance. Setting~600°C. The kit is supplied with 4 different shaped nozzles, which can be used as follows. Concentrator Nozzle • Directs a concentrated heat flow to the work surface.
Hook Nozzle • Disperses the heat flow evenly around the whole work surface. Heart Shavehook • Ideal for defrosting Hook Nozzle frozen pipes, soldering pipe work, bending plastics or heat shrinking electrical parts. Shavehooks Assembly of Shavehook 1. Select the required blade. 2. Take the shavehook handle from the set, remove the nut from the end and fit the required blade. 3. Fix in place by refitting and tightening the nut.
REMOVING PAINT - WINDOW FRAMES burn. Run under cold water and seek medical advice. 1. Use the glass protection nozzle. 2. Ensure the nozzle is facing the correct way to deflect heat away from the glass before you switch on the heat gun. 3. Rotate the gun/nozzle 90º as you move to horizontal or vertical bead. 4. Paint can be removed by using a shavehook and/or a soft, wire brush. BENDING PLASTIC TUBE WARNING – Glass can break easily when heated. 1.
Maintenance Trouble Shooting Always allow the heat gun to cool down and disconnect from power If a problem occurs always switch the unit off immediately. stored away by wiping over with a and rated 13 amps. If an extension supply after use. The heat gun My unit fails to work? Check the fuse in the plug is sound should be cleaned before being clean damp cloth. DO NOT USE cable is used it must be fully ANY CHEMICALS. Ensure that the unwound and rated at least 10 ventilation slots are not blocked.
GUARANTEE The heat gun is guaranteed for a period of 2 years against faulty manufacture or materials. It is not guaranteed for industrial or hire purposes. The scraper, shavehooks and nozzles are classed as consumables and are not covered by the guarantee. This guarantee does not affect your statutory rights. In the event of any problem occurring, please contact our helpline on 01483 454666. Monday-Friday 08:30-17:00 (excluding Bank Holidays) or email enquiries@earlex.co.
OTHER PRODUCTS FROM EARLEX Steam Wallpaper Strippers: Designed to remove all types of wallpaper, multi-layered papers and Artex®.
