Ltd. OPERATING INSTRUCTIONS PAINT SPRAYING SYSTEM

NOZZLE & NEEDLE
l Unscrew Adjustment Ring (9)
l Remove the Air Cap (8)
l Completely remove Adjustment Screw (4)
l Remove the Spring (3)
l Push out the Needle (2) – do not use tools for this
l Remove the Fluid Tip (7)
l Remove Air Flow Plate (6)
l Remove Nozzle Washer (17)
l Place all of these items into a container and clean
l them using a brush and clean thinners
l Clean the inside of the gun
l Thoroughly dry these parts before
l reassembling
l Grease the Fluid Needle Packing (13)
l Reassemble parts in reverse order.
l It is recommended fitting the fluid tip (7) prior to the
l needle
NEVER DISPOSE OF PAINTS OR SOLVENTS INTO
DRAINS. CONTACT YOUR LOCAL
COUNCIL TO ARRANGE COLLECTION OR FOR
DETAILS OF NEAREST REGISTERED DISPOSAL SITE.
19