Quick Start Guide

Remember to register your DryBoost UV
www.dryandstore.com/warranty
Need assistance?
1-800-327-8547 | [e-mail]
Quick Start Guide
1 Plug the power plug into an
electrical outlet.
4 Place your charging base onto
the tray, and plug your charging
cable into your charging base.
2 Plug the other end into the
Type-C USB port on DryBoost UV.
6 Plug in the USB Type-A end of
the charging cable into the back
of DryBoost UV.
7 Close the lid and touch the
power button.
DryBoost UV will shut o automatically
at the end of the cycle.
Interrupt the cycle at any time by lifting the lid. The cycle will not restart once
the lid is closed. Touch the power button for one second to restart the cycle.
Touch for
1 SECOND for
sanitizing (5 min.)
and drying (6 hrs.)
— OR —
Touch and Hold
for 3 SECONDS
for sanitizing
(5 min.) only.
5 Add your instruments to the
charging base. Position the
charging base so the tips
and tubes receive maximum
exposure from the UV-C lamp.
DryBoost UV has an additional USB
port in the back for charging other
items (phone, watches, or other
electronic devices).
3 Thread your base charging cable
through the opening in the back
of DryBoost UV.
SEC
SEC
Remember to register your DryBoost UV
NOTE
Package Contents
DryBoost UV®
Power Adapter
Quick Start Guide