Datasheet

84-8515.8640 - Switching element with bi-colour illumination

84-8515.8640 - Switching element with bi-colour

illumination

Attention: The preview is based on a sample product. This can

differ from your current configuration.

Other Attributes

Weight 0,015 kg

Operating voltage 24 V DC ±10 %

Operation current 15 mA

IP-Rating

Protection degree IP40

Connection Method

Terminal Flat ribbon cable

Switching element

Contact material

Switching system Short-travel element

Contacts 1 NO

Switching voltage 42 V AC/DC

Switching current 0.1 A

Illumination

LED colour

Stand: 29.11.2019

PAGE 1
84-8515.8640 - Switching element with bi-colour illumination 84-8515.8640 - Switching element with bi-colour illumination Other Attributes Weight Operating voltage Operation current IP-Rating Protection degree Connection Method Terminal 0,015 kg 24 V DC ±10 % 15 mA IP40 Flat ribbon cable Switching element Contact material Switching system Contacts Switching voltage Switching current Attention: The preview is based on a sample product. This can differ from your current configuration.
PAGE 2
84-8515.8640 - Switching element with bi-colour illumination Wiring diagram Additional information LED and built-in resistor included Standard version: Cable length 300 mm with insulated ferrule Other options on request: Customisation of cable and connectors. Protection degree IP 67, rear side fully sealed. The switching element cannot be disconnected from the actuator any longer Best illumination level will be reached with aluminium lens with spot, Part No. 84-7215.x00 and 84-7211.