Datasheet

Created:
Reviewed:
Approved:
Doc. No.
Version / status
Page
16/05/2017 / KRJ
16/05/2017 / KRJ
16/05/2017 / KRJ
19003064095
B / 2590 Series - released
2/3
EAO Systems AG
CH-4600 Olten
Telephone [phone]
Fax [phone]
www.eao.com
Mechanical characteristics
External dimensions:
See dimensional diagram 1
(Female M12 connector not included)
Note:
- The dimensional diagram shows the housing with the
emergency stop switch and M12 plug installed
- All side walls exhibit a pull of around 1°.
Dimensional diagram 1
Mounting
▪ Mount mounting adapter onto mounting surface
▪ Mount emergency stop Smart Box on one side (note direction
of mounting adapter on the housing)
▪ Push the Smart Box onto the adaptor on the other side until it
audibly clicks into place
▪ Alternatively, the module can be mounted on a standard top
hat rail, or it can be mounted on a base using screws on the
rear (see dimensional diagrams).
Dismantling
▪ Pull out spring element using screwdriver
and lift Smart Box
▪ Remove Smart Box from the other side
Alternative fixing
3x holes for
PT screw 2.5
(max. depth 6mm)