Datasheet

61
Devices raised mounting
16
11.2009
if mounted with anti-twist device, the lug is on the left side
Actuators usable for front dimensions:
b 24 x 24 mm | b 18 x 18 mm | a 18 x 24 mm | 24 mm dia. | 18 mm dia.
Essential Accessories:
d Anti-twist ring page 41
d Keylock front bezel for keylock switch, raised mounting page 27
d Switching element for Keylock- and Selector switch 3 positions page 36
Continuation see next page
Anti-twist ring (not needed by using anti-twist device)
Other lock numbers on request
Switching action: MA = Maintained action, M = Momentary action
Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66
Keylock switch actuator 3 positions
0
Front protection Switching action Key remove
Typ-Nr.
Mounting dimensions Technical drawing Circuit drawing
e
Keylock switch actuator 3 positions
Pos. C: Maintained action
Pos. A: Basic position
Pos. B: Maintained action
Standard lock 311
IP 65 MA-0-MA A 61-2601.0/D 3 17 19 0.065
A + B 61-2604.0/D 3 17 19 0.065
B 61-2602.0/D 3 17 19 0.065
C 61-2603.0/D 3 17 19 0.065
C + A 61-2605.0/D 3 17 19 0.065
C + A + B 61-2607.0/D 3 17 19 0.065
C + B 61-2606.0/D 3 17 19 0.065
Pos. C: Maintained action
Pos. A: Basic position
Pos. B: Momentary action
Standard lock 311
IP 65 MA-0-M A 61-2701.0/D 3 17 18 0.065
C 61-2703.0/D 3 17 18 0.065
C + A 61-2705.0/D 3 17 18 0.065
Pos. C: Momentary action
Pos. A: Basic position
Pos. B: Maintained action
Standard lock 311
IP 65 M-0-MA A + B 61-2804.0/D 3 17 15 0.065
B 61-2802.0/D 3 17 15 0.065
Pos. C: Momentary action
Pos. A: Basic position
Pos. B: Maintained action
Standard lock 311
IP 65 M-0-MA A 61-2801.0/D 3 17 15 0.065
Pos. C: Momentary action
Pos. A: Basic position
Pos. B: Momentary action
Standard lock 311
IP 65 M-0-M A 61-2501.0/D 3 17 14 0.065