Datasheet

330
01.2002
44
accessories
technical drawings from page 334
technical drawings from page 334
connection method: screw terminal = ST
screw terminal for primary connection, for secondary connection wire tails with core-end sleeves
technical drawings from page 334
for lamp voltage reduction
Please keep to the country specific security rules.
resistor diode element
number of diodes
alternating service
voltage mounting method
connection method
part no.
technical drawing
e
resistor diode
element
for incandescent lamp
130 V/2.4 W
1 N 4007
1 Ue = 220-240 VAC front or base ST 44-614.11 42 0,009
2 Ue = 220-240 VAC front ST 44-614.21 42 0,015
for incandescent lamp
60 V/1.2 W
1 N 4007
1 Ue = 110-125 VAC front or base ST 44-614.12 42 0,009
2 Ue = 110-125 VAC front ST 44-614.22 42 0,015
diode element
number of diodes
connection method
part no.
technical drawing
e
diode element
1 N 4007, for front or base mounting
1ST44-612.1 42 0,009
2ST44-612.2 42 0,011
lamp transformer
operation voltage
connection method
part no.
technical drawing
e
lamp transformer
short-circuit proof, 1.2 VA, 50/60 Hz, for front or base mounting
125/24 V ST 44-975 43 0,102
125/6 V ST 44-970 43 0,102
230/24 V ST 44-976 43 0,102
230/6 V ST 44-971 43 0,102
400/24 V ST 44-977 43 0,102
400/6 V ST 44-972 43 0,102
capacitor
value part no.
e
capacitor
use with 60 V/20 mA, 50 Hz lamp voltage
230 V/0.27 µF 44-958.090 0,002