Datasheet

323
01.2002
44
Accessories/Spare parts
technical drawings from page 334
see inscription
for indicator full face illumination
technical drawings from page 334
front bezel set for flush mounting with label support
use material colour
a
36 x 60 mm
Typ-Nr.
technical drawing
e
front bezel set for flush moun-
ting with label support
for illuminated-/pushbutton, selec-
tor- and keylock switch, interlok-
king pushbutton
the mounting depth extends for 12
mm
plastic black 44-946.04 31 0,011
for indicator, potentiometer
the mounting depth extends for 3
mm
plastic black 44-946.02 31 0,007
label for front bezel set for flush mounting with label support
colour
a
27 x 18 mm
Typ-Nr.
e
label for front bezel set for flush mounting with label support
of plastic, 2 layers (alu/black), autoadhesive
aluminium colourless 44-946 0,001
of plastic, 2 layers (black/white), autoadhesive black 44-946.0 0,001
lens cap
lens cap colour part no.
e
lens cap
of plastic incl. sealing ring
transparent blue 44-965.6 0,003
colourless, clear 44-965.7 0,003
yellow 44-965.4 0,003
green 44-965.5 0,003
red 44-965.2 0,003
lock cap
colour part no.
e
lock cap
Protection when used under adverse ambient conditions. Remove gasket from the actua-
tor. Cannot be used with the label support.
grey 44-921.08 0,004
black 44-921.00 0,004
legend plate
a
30 x 60 mm
Typ-Nr.
technical drawing
e
legend plate
aluminium anodized, for engraving, for protection IP 40
44-955 32 0,001