Datasheet

Single-LED, T5.7
Illumination colour Operating voltage Operation current Lumi. Intensity Dom. Wavelength Part No.
Wiring
diagram
Red 6 V DC +10% 15 mA ±15 % 350 mcd 630 nm 10-2106.3142 33
12 V AC/DC +10% 7 - 14 mA ±15 % 330 mcd 630 nm 10-2109.1062 33
24 V AC/DC +10% 7 - 14 mA ±15 % 330 mcd 630 nm 10-2112.1062 33
28 V AC/DC +10% 7 - 14 mA ±15 % 330 mcd 630 nm 10-2113.1062 33
48 V AC/DC +10% 4 - 8 mA ±15 % 200 mcd 630 nm 10-2119.1042 33
Yellow 6 V DC +10% 15 mA ±15 % 300 mcd 587 nm 10-2106.3144 33
12 V AC/DC +10% 7 - 14 mA ±15 % 280 mcd 587 nm 10-2109.1064 33
24 V AC/DC +10% 7 - 14 mA ±15 % 280 mcd 587 nm 10-2112.1064 33
28 V AC/DC +10% 7 - 14 mA ±15 % 280 mcd 587 nm 10-2113.1064 33
48 V AC/DC +10% 4 - 8 mA ±15 % 180 mcd 587 nm 10-2119.1044 33
Green 6 V DC +10% 7 mA ±15 % 1050 mcd 525 nm 10-2106.3145 33
12 V AC/DC +10% 4 - 7 mA ±15 % 1050 mcd 525 nm 10-2109.1065 33
24 V AC/DC +10% 4 - 7 mA ±15 % 1050 mcd 525 nm 10-2112.1065 33
28 V AC/DC +10% 4 - 7 mA ±15 % 1050 mcd 525 nm 10-2113.1065 33
48 V AC/DC +10% 2 - 4 mA ±15 % 600 mcd 525 nm 10-2119.1045 33
Blue 6 V DC +10% 15 mA ±15 % 680 mcd 470 nm 10-2106.3146 33
12 V AC/DC +10% 4 - 14 mA ±15 % 650 mcd 470 nm 10-2109.1066 33
24 V AC/DC +10% 7 - 14 mA ±15 % 650 mcd 470 nm 10-2112.1066 33
28 V AC/DC +10% 7 - 14 mA ±15 % 650 mcd 470 nm 10-2113.1066 33
48 V AC/DC +10% 4 - 8 mA ±15 % 400 mcd 470 nm 10-2119.1046 33
White 6 V DC +10% 6 mA ±15 % 900 mcd x: 0.31 / y: 0.32 nm 10-2106.3149 33
12 V AC/DC +10% 3 - 6 mA ±15 % 900 mcd x: 0.31 / y: 0.32 nm 10-2109.1069 33
24 V AC/DC +10% 2,5 - 5 mA ±15 % 750 mcd x: 0.31 / y: 0.32 nm 10-2112.1069 33
28 V AC/DC +10% 2,5 - 5 mA ±15 % 750 mcd x: 0.31 / y: 0.32 nm 10-2113.1069 33
48 V AC/DC +10% 2 - 4 mA ±15 % 600 mcd x: 0.31 / y: 0.32 nm 10-2119.1049 33
Additional information
For LED element tting information see Application guidelines, LED polarity
Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the
equipment (use a terminal plate)
When using AC/DC types with AC operation, slight ickering can occur
The luminous intensity stated is for when used with DC
• Electricalandopticaldataaremeasuredat25°C
The specied versions are built with a protection diode (halve wave rectier) in series and the LED
Luminosity and wave length variations caused by LED manufacturing processes may cause slight diffe-
rences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Where supply voltages are over 48 V, a voltage-reduction element (external protective series resistor)
must be used.
Dimensions [mm]
Components
01/2019 § eao.com
325
14
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96
30 max.
+
Ø6 max.