Datasheet

4
Illumination
16 max.
Ø6.1 max.
LED T1 3/4 MG
Product can differ from the current configuration. Dimensions [mm]
Additional Information
• A suitable lamp remover Part No. 61-9740.0
(Series Swisstac Part No. 300-0002-00)
• When using AC/DC types with AC operation,
slight flickering can occure
• Luminous intensity data of the LEDs on direct
voltage
• Electrical and optical data are measured at 25 °C
• If the 24VDC Bi-colour lamp is driven with normal
polarity (plus on middle contact of the lamp) the
first mentioned colour will light up, with inverted
polarity the second colour will ligth up
• The specified versions are built with a protection
diode (halve wave rectifier) in series and the LED
• Luminosity and wave length variations caused by
LED manufacturing processes may cause slight
differences regarding the illumination
LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight
Single-LED
Single-LED red 6 VDC +10 % 15 mA ±15 % 350 mcd 630 nm 10-2J06.3142 0.002 kg
12 VAC/DC +10 % 7/14 mA ±15 % 330 mcd 630 nm 10-2J09.1062 0.002 kg
24 VAC/DC +10 % 7/14 mA ±15 % 330 mcd 630 nm 10-2J12.1062 0.002 kg
28 VAC/DC +10 % 7/14 mA ±15 % 330 mcd 630 nm 10-2J13.1062 0.002 kg
48 VAC/DC +10 % 4/8 mA ±15 % 200 mcd 630 nm 10-2J19.1042 0.002 kg
Single-LED yellow 6 VDC +10 % 15 mA ±15 % 300 mcd 587 nm 10-2J06.3144 0.002 kg
12 VAC/DC +10 % 7/14 mA ±15 % 280 mcd 587 nm 10-2J09.1064 0.002 kg
24 VAC/DC +10 % 7/14 mA ±15 % 280 mcd 587 nm 10-2J12.1064 0.002 kg
28 VAC/DC +10 % 7/14 mA ±15 % 280 mcd 587 nm 10-2J13.1064 0.002 kg
48 VAC/DC +10 % 4/8 mA ±15 % 180 mcd 587 nm 10-2J19.1044 0.002 kg
Single-LED green 6 VDC +10 % 7 mA ±15 % 1050 mcd 525 nm 10-2J06.3145 0.002 kg
12 VAC/DC +10 % 4/7 mA ±15 % 1050 mcd 525 nm 10-2J09.1065 0.002 kg
24 VAC/DC +10 % 4/7 mA ±15 % 1050 mcd 525 nm 10-2J12.1065 0.002 kg
28 VAC/DC +10 % 4/7 mA ±15 % 1050 mcd 525 nm 10-2J13.1065 0.002 kg
48 VAC/DC +10 % 2/4 mA ±15 % 600 mcd 525 nm 10-2J19.1045 0.002 kg
{$d=BR10_AGAU_Single-LED_T1_3/4_MG}
10