Datasheet

Illumination

Ø10 max.

25 max.

LED BA9s, EN 50155, Fail Safe

Product can differ from the current configuration. Dimensions [mm]

LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No.

Wiring

diagram

Weight

Multi-LED Fail Safe

Multi-LED rot 72 VAC/DC –30%/+25 % 2.2 mA –30%/+25 % 4 x 190 mcd 625 nm 10-4H21.1032P 1 0.002 kg

110 VAC/DC –30%/+25 % 2 mA –30 % /+25% 4 x 170 mcd 625 nm 10-4H22.1032P 1 0.002 kg

Multi-LED yellow 72 VAC/DC –30%/+25 % 2.2 mA –30%/+25 % 4 x 190 mcd 589 nm 10-4H21.1034P 1 0.002 kg

110 VAC/DC –30%/+25 % 2 mA –30%/+25 % 4 x 170 mcd 589 nm 10-4H22.1034P 1 0.002 kg

Multi-LED green 72 VAC/DC –30%/+25 % 2.2 mA –30%/+25 % 4 x 120 mcd 525 nm 10-4H21.1035P 1 0.002 kg

110 VAC/DC –30%/+25 % 2 mA –30%/+25 % 4 x 170 mcd 525 nm 10-4H22.1035P 1 0.002 kg

Multi-LED blue 72 VAC/DC –30%/+25 % 2.2 mA –30%/+25 % 4 x 30 mcd 465 nm 10-4H21.1036P 1 0.002 kg

110 VAC/DC –30%/+25 % 2 mA –30%/+25 % 4 x 25 mcd 465 nm 10-4H22.1036P 1 0.002 kg

Multi-LED white 72 VAC/DC –30%/+25 % 2.2 mA –30%/+25 % 4 x 160 mcd 10-4H21.1039P 1 0.002 kg

110 VAC/DC –30%/+25 % 2 mA –30%/+25 % 4 x 145 mcd 10-4H22.1039P 1 0.002 kg

Additional Information

• A suitable LED remover Part No. 700.006.0 (Se-

ries 44 Part No. 44-935)

• Luminous intensity data of the LEDs on direct

voltage

• Electrical and optical data are measured at 25 °C

• The specified 72 and 110 VAC/VDC versions are

built with a protection diode

• Specified 72 and 110 VAC/VDC versions are built

with a bridge rectifier

• In case one LED fails, the other pair of still functio-

ning LED›s is working. The light output then is half

in order to indicate the malfunction and shows

this way the need for replacement

• Luminosity and wave length variations caused by

LED manufacturing processes may cause slight

differences regarding the illumination

{$d=BR10_AGAU_Single-LED_BA9s_fail_safe}