Datasheet

02
Marking
21
03.2009
0
All dimensions in mm
0
0
General notes
1. Engraving
In addition to the most commonly used world
languages, in DIN 1451-3 close spacing, other
typefaces are available as Scandinavian,
Slavic, Greek, Russian and Polish.
Red, blue and black lenses are filled with white
colour. Other colour lenses are filled in black.
Standard height of letters is 3 mm. If the height
is not specified, we will supply 3 mm engraved
letters.
2. Hot stamping
For larger series it is worth considering
markings by means of hot stamping We will
pleased to advise you.
For letters and figures, typefaces with 2.5 mm,
3 mm and 4 mm are available.
3. Film inserts
Instead of using engraving the lenses can be
fitted with transparent film inserts, as an
alternative. For this purpose, though, it is
advisible to use lenses without ripped pattern.
In the case of use of a smoke-black lens the
fitted film becomes readable only if the lamp is
on.
The film (F) is inserted in the cap. To ensure
even illumination a diffusor (D) is
recommended, which is inserted beneath the
film. If, on the other hand, the diffusor is
inserted above the film, the lettering only
becomes legible when the lamp is alight. To
hold the film and diffusor in position, the use of
a holder (N) is advised.
The film thickness is 0.2 mm.
Film insert
max. size
Height of letters
h
Number of lines Number of (target value)
capital letters per line
Number of (target value)
small letters per line
Image
14.3 x 22.4 3 4 11 13 B1
7 - 8 8 - 9 B2
427 9 B1
45 5 - 6 B2
5 2 5 - 6 6 - 7 B1
33 - 4 4 B2
615 6 B1
23 4 B2
813 4 B1
22B2
h
F
D
N
ABC
abc
ABC
abc
B1 B2