Datasheet

02
Devices raised mounting
10
03.2009
Note:
The keylock front bezel of the switch types 02-198.01x and 02-695.01x are factory-assembled and do not have to be ordered separately.
Essential Accessories:
d Front bezel flush page 13
d Keylock front bezel page 12
Continuation see next page
After turning the key 90° clockwise, the switch can be operated.
In the unlocked positions the switch always performs a momentary action.
Contacts: C = Changeover
Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal
Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25
Keylock switch actuator 2 positions
0
Front protection Contacts Key remove Terminals
a 24 x 36 mm
Typ-Nr.
Mounting dimensions Technical drawing Circuit drawing
e
Keylock switch actuator 2 positions
Position A : lockable, actuated
Standard lock YB1
Front plastic grey
IP 40 2 C A PT 2.8 02-690.012 1 7 13 0.055
PT 4.8 02-690.013 1 7 13 0.055
ST 02-690.011 1 7 13 0.055
Position A : lockable, non-actuated or actuated
Standard lock YB1
Front plastic grey
IP 40 2 C A PT 2.8 02-692.012 1 7 13 0.055
PT 4.8 02-692.013 1 7 13 0.055
ST 02-692.011 1 7 13 0.055
Position A : lockable, non-actuated
Standard lock YB1
Front plastic grey
IP 40 2 C A PT 2.8 02-691.012 1 7 13 0.055
PT 4.8 02-691.013 1 7 13 0.055
ST 02-691.011 1 7 13 0.055
Position A : lockable, non-actuated or actuated
Standard lock YB1
Front plastic grey
(can be used with protective cover 22-925)
IP 40 2 C A PT 2.8 02-198.012 1 7 13 0.055
PT 4.8 02-198.013 1 7 13 0.055
ST 02-198.011 1 7 13 0.055
Position A : lockable, non-actuated
Position C : locked, key not removeable
Standard lock YB1
Front plastic grey
IP 40 2 C A PT 2.8 02-695.012 1 7 13 0.055
PT 4.8 02-695.013 1 7 13 0.055
ST 02-695.011 1 7 13 0.055