Installation Guide

®
4.
Attach mounting hardware to the
prongs protruding from the
underside of the sink rim
Make sure the hooked side of the
mounting clip is facing away from
the sink
5.
Apply Silicone or Plumber’s Putty
Countertop
Fasten the screw
Sealant or putty
Sink
Clean and dry the surface around the
opening of the sink
Turn the unit upside down to apply
sealant. Apply silicone-based sealant
(not included) underneath the edge
of the sink
6.
Secure Sink to Countertop
Insert the sink into the opening, check
the alignment of the sink to the cutout
in the countertop, and press firmly.
Tighten the screws in the front of the
sink, followed by the ones in the back
and on the sides of the sink
Remove excess silicone-based sealant
Allow sealant to set for 30-60 minutes