Specifications

QA044 REV05 9.4.14 TT
8-3
Maintenance
Daily Operator Responsibilities
Proper Fluid Checks
Engine Oil
Check engine oil with the unit on a level surface, the ignition switch in the ―OFF‖ posi-
tion, the shifter position in ―PARK‖ and parking brake applied. Open side access door
or hood depending on engine configuration. Remove dipstick from crankcase, wipe it
with a cloth. Insert it fully and take out it gently again. Check the oil level by the marks
on the dipstick. The oil level must be between the ―Max‖ level and the ―Min‖ level. DO
NOT OVERFILL.
Coolant
DO NOT remove recovery tank cap or check coolant level while engine is hot! With
engine cool, the ignition switch in the ―OFF‖ position, the shifter position in ―PARK‖ and
the parking brake applied, open hood, set hood prop and look at left side of recovery
tank. The reservoir tank is translucent, so the fluid is readily visible without removing
the cap. Fluid level should be at the ―Cold fill level‖.
Transmission Fluid
With unit in park and parking brake set in the ―ON‖ position, start engine. Open side
access door. Remove dipstick from transmission case, wipe it with a cloth. Insert it fully
and take it out gently again. Check the fluid level by the marks on the dipstick. The
transmission fluid level must be between the ―Max‖ level and the ―Min‖ level on the
dipstick. DO NOT OVERFILL.
Brake Fluid
Check brake fluid with the unit on a level surface, the ignition switch in the ―OFF‖ posi-
tion, the shifter position in ―PARK‖ and parking brake applied. Open hood, set hood
prop and locate master cylinder reservoir. Remove spring clips and take off lid. Brake
fluid level should be at the top of reservoir.
Power Steering Fluid
Check power steering fluid with ignition switch in ―OFF‖ position, the shifter position in
―PARK‖ and the parking brake applied. Open hood, set hood prop remove cap from
power steering reservoir. Fluid level should be between the arrows on the indicator
stick. DO NOT OVERFILL.