Specifications

QA044 REV05 9.4.14 TT
Operation Screen:
The Operation Screen is the main screen and
provides gauge and other engine/truck operat-
ing information. The Operation Screen shows
the Fuel level (large center gauge), Oil Pres-
sure (upper right), and Coolant Temperature
(upper left) as the three analog gauges. Supple-
mental information is shown as text at the bot-
tom right corner of the display (engine hours,
battery voltage, and engine rpm).
The Operation Screen will also show fault
codes and warning and informational messages.
If a fault code appears, take careful note of it be-
fore powering down the tractor. The fault code
will be reset after restarting.
Supplemental Options:
Brightness/Contrast:
Press D from the Operation Screen. Use the A
and B buttons to adjust the brightness. Use the
C and D buttons to adjust the contrast.
The display will return to the Operation Screen
after 5 seconds without a key press.
Units:
Press C then B at the same time for 3 seconds to
toggle from Imperial to Metric Units.
Fault Codes:
Press B to from the Operation Screen to view
the Engine Fault Screen. This will show ac-
tive and inactive faults that have occurred since
the vehicle was turned on. If you are receiving
a fault code, take careful note of it before pow-
ering down the tractor. All fault history will be
reset after restarting.
General Usage
5-4