Specifications

3
INTRODUCTION
Thank you for purchasing an Eagle
®
sonar. Your SupraPro I.D.™ is a high
quality sonar designed for both professional and novice fishermen. Al-
though it's a low cost unit, it has features available only on other units that
cost much more. This unit has an automatic feature that finds and displays
the bottom, fish, structure, and more! All you have to do is press the ON
key. However, if you wish to fine tune the unit, simply press the menu key.
The SupraPro I.D. has powerful features available through easy-to-use
menus.
To get started with your Eagle unit, first read the installation section. This
is where it all begins. Improper installation can cause problems down the
road. After you’ve read the instructions, install the unit, then read the rest
of the manual. The more you know about your unit, the better it will perform
for you. Take this manual for reference when you head for the water.
SPECIFICATIONS
Dimensions 5.9" W x 5.75" H x 3.4" D
Input Voltage 10 - 15 vDC
Current Drain 350 ma (lights off)
500 ma (lights on)
Transmitter
Frequency 192 kHz
Output Power 275 watts (peak-to-peak)
34.4 watts (RMS)
Display 100 pixels (H) x 65 pixels (W)
Supertwist Liquid Crystal Display
NOTICE!
The storage temperature for your unit is from -4 degrees to +167 degrees
Fahrenheit (-20 degrees to +75 degrees Celcius). Extended storage in
temperatures higher or lower than specified will damage the liquid crystal
display in your unit. This type of damage is not covered by the warranty.
For more information, contact the factory customer service department or
your local service center.