Specifications

12
Fish ID feature’s menu appears as shown at
right. Now press the down arrow key. This
turns the feature off. To turn it back on, repeat
the above steps, but press the up arrow key
instead.
The Fish ID feature can’t be used when the
SupraPro I.D. is in the manual mode. If you
turn the automatic feature off, the Fish ID
feature will automatically be turned off, also.
FISHTRACK™
The SupraPro I.D. automatically displays the depth of a target when the
Fish ID feature places a fish symbol on the screen as shown below left.
This feature is automatically enabled when the SupraPro I.D. is turned on.
To turn it off or on again, press the MENU key repeatedly until the
FishTrack menu appears as shown below. Now press the down arrow key
to turn it off. Remember, Fish ID must be on in order to use the FishTrack™
feature.
DISPLAY MODE
The SupraPro I.D. has two different screen modes. The first mode is the
same one used when the unit is first turned on. The second mode is a high
speed scroll with FASTRAK. This mode turns the digital sonar and
automatic mode off, scrolls the chart across the screen at a high rate of
speed, and shows the FASTRAK on the right side of the screen. FASTRAK