Instructions / Assembly

CLEAR ACRYLIC

CONCRETE SEALER

OIL-BASED

Non-Yellowing pure acrylic for

longer lasting shine and protection.

Protects concrete from sun, water,

salt, oil, dirt, etc...

Resists Flaking & Peeling

Stabilizes Paver Sand

Specially formulated for use on:

Not recommended as a top coat

over colored coatings

Oil based for best adhesion

• Driveways

• Sidewalks

• Patios

• Porches

• Garage Floors

• Pool Decks

• Exterior Floors

• Concrete Pavers

HIGH GLOSS FINISH

HIGH GLOSS Wet Look

Most Sealers are

Do not use on clay bricks.

Not for use on Clay Bricks, Slate, Stone Slabs,

Granite, Tile (except for unglazed Terra Cotta),

Terrazzo, Epoxy Set Stone Chattahoochee,

Polished, Densified, Painted Surfaces, surfaces

previously coated with Water Based Stain, Colored

Sealers, or recently treated with a Curing

Compound. Not for interior spaces unless

completely ventilated. Not for vertical surfaces

except for steps. Not recommended for any surface

not specifically recommended. Always test a spot

before proceeding.

Exposed Aggregate - Eagle Supreme Seal and Eagle

Premium Coat add a High-Gloss wet look and leaves a

hard protective acrylic film. Use Eagle Crack Filler

before applying. Premium Coat is available in Clear,

Brown and Gray tinted high-solids sealer.

PAGE 1
Exposed Aggregate - Eagle Supreme Seal and Eagle Premium Coat add a High-Gloss wet look and leaves a hard protective acrylic film. Use Eagle Crack Filler before applying. Premium Coat is available in Clear, Brown and Gray tinted high-solids sealer. CLEAR ACRYLIC CONCRETE SEALER Do not use on clay bricks.
PAGE 2
INSTRUCTIONS Why seal concrete? Smooth troweled concrete should be etched with acid based cleaner. What types of concrete can be sealed? Eagle Supreme Seal can be applied to all types of concrete and cementious surfaces. However concrete much be clean and dry. Surfaces should be unsealed or previously sealed with a compatible oil-based sealer. Test for compatibility. exterior 6. Test a sample spot with sealer on surface. Allow to dry. Be sure that test is acceptable before proceeding with the project. 7.