User manual

11
3.Once Windows prompts [You may safely remove this device], you
can then unplug the USB cable from the USB port of computer.
Mac OS
When disconnecting the external enclosure form computer, close all
windows and quit all running applications that are stored on the
external drive and drag the [External Drive] icon into [Trash] to
dismount it from the desktop prior to unplugging the external
enclosure from the connection port.
Windows 98SE
1.Double click the green Unplug or Eject hardware icon in system
taskbar and select the device that you want to remove and click
on [Safety Remove].
2. When the system prompts [Confirm device to be stop], click on [OK].
When the green Arrow Icon is disappeared, plug out the USB cable
from the USB port of computer.
Note: Do not unplug or remove the device if the read/write LED of the
Hi-Speed USB2.0 Disk is on or blinking. Wait for the LED to turn off
before you safely remove the device.
4. Tighten up the screws to fix the HDD and put back the both side bar.
5. Connect the SATA data transfer and power cable to HDD.