User manual

8
9
DRIVERS INSTALLATION
Windows ME, 2000, XP and above versions
Under the above mentioned system, you don’t have to install additional
device drivers. The system will detect a USB Mass Storage Device
automatically whenever you plugging the USB external enclosure into
your computer.
1.Once you plugging the USB external enclosure, system will assign a
drive letter to the device and will usually designate it as [USB DISK].
2.After the system installed the driver of USB DISK, double click on
[My Computer], a new drive disk is added in a few seconds.
Windows 98SE
Installing the USB disk under Windows 98 requires USB disk driver.
1.Inserting the USB external enclosure utility driver CD. The Install Shield
Wizard dialog box will then appear to display some information
regarding the setup program. Click [Next] to continue.
2.Wait until setup has finished installing the USB disk. When it prompts
you that installation is complete, click [Finish] to restart your computer.
3.Once installation completes, you’ll find USB Safe Remove icon on the
taskbar.
If the new hard disk doesn’t appear in [My Computer], it means the USB
hard disk is a brand new hard disk, which does not contain any partition.
Please refer to the Partition Hard Disk chapter to format your Hard disk
before using this device.
MAC OS
A.This USB external enclosure is supported by the Mass Storage Support
1.3.5 in Mac OS. You don’t need to install any drivers.