User manual

2.Click the [Disk Management] under [Storage]. Your new Hard Drive
should have the right capacity shown. (E.g. figure above [Disk 1] is
showing approximately 160GB). Right click the [Disk 1], and choose
[Initialize Disk].
PARTITION HARD DISK
Windows XP/2000/2003
Note: For formatted Hard Drive, proceed to step 2.
1.Click the [start] button and click on [Control Panel], double-click the
[Administrative Tools], and then double-click the [Computer
Management].
11
6
4. Tighten up the screws to fix the HDD and put back the both side bar.
5. Connect the SATA data transfer and power cable to HDD.