SDS

- 1 -

MATERIAL SAFETY DATA SHEET

Complies with OSHA’s Hazard Communication Standard, 29 CFR 1910.1200

IDENTITY: Eagle Concrete Crack Filler (Broom Swept and Exposed Aggregate)

MSDS Date: 6/19/2007 HMIS CODES: H

F R P

0 0 0 0

SECTION I-MANUFACTURER

NAME: Eagle I.F.P Co. 24 HOUR EMERGENCY PHONE

PO Box 100431 1-800-535-5035 Infotrac

Nashville, TN 37224

COMPANY TELEPHONE:

615-872-2710

615-872-9052 Fax

SECTION II-COMPOSITION INFORMATION

Component CAS# Amount (%W/W)

Water 7732-18-5 15%

Acrylic Polymer proprietary 15%

Silica sand 14808-60-7 70%

SECTION III-PHYSICAL/CHEMICAL CHARACTERISTICS

Appearance: Liquid with suspended solids

Color: White (Broomswept) or Brown (Exposed Aggregate)

pH: 9.5 Approx.

Solubility in Water: Liquid is completely miscible, solids are not miscible

Odor: Mild

Boiling Point (760 mmHg): 100°C (212°F)

Freezing Point: 0°C (32°F)

Specific Gravity: 1.1

SECTION IV-FIRE AND EXPLOSION HAZARD DATA

Flash Point: Not applicable.

Autoignition Temperature: Not currently available.

Flammable Limits: LEL=N/A UEL=N/A

Extinguishing Media: Non-flammable (aqueous solution): After water evaporates, remaining material

will burn. Apply alcohol-type or all-purpose-type foam by manufacturers' recommended techniques for

large fires. Use water spray, carbon dioxide or dry chemical media for small fires.

Special Protective Equipment for Firefighters: Use self-contained breathing apparatus when fighting

fires in enclosed areas.

Unusual Fire and Explosion Hazards: Product may spatter if temperature exceeds boiling point of

water.

PAGE 1
MATERIAL SAFETY DATA SHEET Complies with OSHA’s Hazard Communication Standard, 29 CFR 1910.1200 IDENTITY: Eagle Concrete Crack Filler (Broom Swept and Exposed Aggregate) MSDS Date: 6/19/2007 HMIS CODES: H F R P 0 0 0 0 SECTION I-MANUFACTURER NAME: Eagle I.F.P Co.
PAGE 2
SECTION V-REACTIVITY DATA Stability: Stable Materials to avoid: Strong oxidizers and acids. Hazardous Decomposition: Burning can produce carbon monoxide and carbon dioxide. Carbon monoxide is highly toxic if inhaled. Carbon dioxide in sufficient concentrations can act as an asphyxiant. Hazardous Polymerization: Will not occur. SECTION VI-HEALTH HAZARD DATA Routes of Exposure: Ingestion, Skin, Eyes, and Inhalation (minimal) Skin Contact: Brief contact is not irritating.
PAGE 3
SECTION IX-CONTROL MEASURES Protective Gloves: Wear latex or other impermeable gloves. Eye Protection: Wear chemical splash goggles or safety glasses with side shields. Work/hygienic Practices: Use only in well-ventilated areas. Wash thoroughly with soap and water before eating, smoking, or using restroom. Remove contaminated clothing and wash before re-use.