MSDS

Eagle Etch & Clean

Page 1 of 3

_____________________________________________________________________________________________

MATERIAL SAFETY DATA SHEET

Complies with OSHA’s Hazard Communication Standard, 29 CFR 1910.1200

REVSION: 3/5/07

SECTION I-MANUFACTURER

NAME: Eagle IFP. 24 Hour Emergency Telephone No.

P.O. Box 110431 INFOTRAC

Nashville, TN 37224 1-800-535-5035

Tel: 615-872-2710

SECTION II-PRODUCT IDENTIFICATION

IDENTITY: Eagle Etch & Clean

DOT: Corrosive Liquid, acidic, inorganic, N.O.S. (phosphoric acid), 8, UN3264, PGIII

HMIS CODES: H F R P

2 0 1 C

SECTION III-COMPONENTS

CAS # OSHA PEL(TWA) ACGIH(TLV)

Phosphoric Acid 7664-38-2 1 mg/m

1 mg/m

Nonylphenol Ethoxylate 9016-45-9 None Established None Established

SECTION IV-PHYSICAL/CHEMICAL CHARACTERISTICS

Boiling Point (Degrees F): N/A Specific Gravity (H20=1): 1.26

Vapor Density: N/A Odor: Mild

Vapor Pressure: N/A Material V.O.C.: 0 g/l

Appearance and Odor: Clear liquid

SECTION V-FIRE AND EXPLOSION HAZARD DATA

Flash Point (ASTM D-92 COC): N/A

Flammable Limits: Not Determined

Extinguishing Media: Dry chemical, CO2, water fog

Special Fire Fighting Procedures: Evacuate area and fight fire from a distance. Firefighters wear

NIOSH approved self-contained breathing apparatus.

PAGE 1
Eagle Etch & Clean Page 1 of 3 _____________________________________________________________________________________________ MATERIAL SAFETY DATA SHEET Complies with OSHA’s Hazard Communication Standard, 29 CFR 1910.1200 REVSION: 3/5/07 SECTION I-MANUFACTURER NAME: Eagle IFP. P.O. Box 110431 Nashville, TN 37224 Tel: 615-872-2710 24 Hour Emergency Telephone No. INFOTRAC 1-800-535-5035 SECTION II-PRODUCT IDENTIFICATION IDENTITY: Eagle Etch & Clean DOT: Corrosive Liquid, acidic, inorganic, N.O.S.
PAGE 2
Eagle Etch & Clean Page 2 of 3 _____________________________________________________________________________________________ SECTION VI-REACTIVITY DATA Reactivity: Stable in normal conditions. Conditions to avoid: Extreme heat. Incompatibility (Materials to Avoid): Oxidizers and strong alkalis. Hazardous Decomposition (Byproducts): None. Hazardous Polymerization: Will not occur. SECTION VII-HAZARDS IDENTIFICATION Routes of Exposure: Inhalation, Ingestion, and Skin.
PAGE 3
Eagle Etch & Clean Page 3 of 3 _____________________________________________________________________________________________ Precautions to be taken in Handling and Storing: This material is corrosive and will damage metal materials. Storage: Avoid excessive heat. Do not store near oxidizers and strong alkalis. SECTION X-PRECAUTIONS FOR SAFE HANDLING AND USE Normal Handling: Always wear recommended personal protective equipment. Avoid breathing misted material or fumes of heated material.