Instructions / Assembly

Made in U.S.A.
EAGLE IFP COMPANY
www.eaglesealer.com
Eagle INTERIOR CONCRETE DYE
TOOLS & MATERIALS REQUIRED
H
Pump-up sprayer with conical tip. (Acetone–resistant sprayer if using acetone)
H
Eagle ETCH & CLEAN
H
If not using DRIP-LESS Sprayer, absorbent cloth or small container to catch drips
H
Eagle DEGREASER NEUTRALIZER
H
Painter’s masking tape and plastic sheeting
H
Synthetic bristle brush
H
Clean water for cleaning equipment
H
Eagle ARMOR SEAL
H
White buffing pad and tackcloth
H
Eagle CONCRETE POLISH
DYE PREPARATION
INTERIOR CONCRETE DYE concentrate should be transferred into a 1-gallon sprayer. Use clean water or acetone to rinse the
residue from the concentrate bottle into the 1-gallon container. Repeat this step until all SUPER DYE is out of the bottle. Add clean water
or acetone to a final volume of 1 gallon. To use larger capacity sprayers, adjust volumes.
SURFACE PREPARATION
All walls, furniture, columns, or other items/areas that you do not want to color should be masked using painter’s tape and plastic
sheeting. This will protect the items from overspray. Concrete should be cured and clean, free of dirt, dust, residue and oil. Pre-etch and
clean with Eagle ETCH & CLEAN until concrete readily absorbs water. For oily surfaces, Eagle DEGREASER NEUTRALIZER is recom-
mended. Power wash the surface at 3000 psi. If not possible, scrub with clean water and remove excess. Allow to dry 24 hours.
APPLICATION
Always do a test spot in an inconspicuous area before proceeding with the project. Apply with a pump-up sprayer using a conical, fine-spray tip. Small
areas can be brushed using a circular motion to avoid brush strokes. Take care to maintain a wet edge to avoid bleed lines. Do not apply more material than the
surface will absorb in 1 minute. If not using a Drip-Less Sprayer, tape a piece of cloth or a small container to the sprayer body to catch drips while not spraying the
material. Place the tip of the spray wand on the cloth or into the small container immediately after releasing the spray handle. Apply the dye uniformly to obtain
a more uniform final appearance. Apply in a random, circular motion with some overlapping to generate a more mottled look that more closely resembles acid
stain. Colors may be blended to produce an infinite palette or applied over a base color for a unique look. Depending on the depth of color that is desired, more
than one application may be required. Use clean water or acetone to rinse the sprayer between color changes. Keep a container of clean water or acetone
available and place the end of the sprayer wand into it between applications to keep the tip from becoming clogged.
SEALING
The surface must be sealed with a clear concrete sealer to lock in and protect the color. If dye residue is present, remove with white
buffing pad and tackcloth. Do not use water. A light initial coat of sealer should be applied to the dyed surface with a pump sprayer to “lock in”
the dye. Apply sealer per the manufacturer’s instructions. If using water based dyes, wait 4 hours to start sealing with a water-based sealer and
8 hours for solvent based sealer. If using acetone based dye, you can seal immediately. Spray apply first coat of sealer. Water based Eagle
ARMOR SEAL will work if floor is not too tight. For on going maintenance, clean with water only and use Eagle CONCRETE POLISH for ongoing
scuff protection and maintenance. Apply 2-3 coats initially per the label’s instructions, and touch-up periodically as a regular maintenance routine.
COVERAGE RATE
Approximately 200-400 square feet per gallon, depending on porosity and depth of color desired.
TECHNICAL DATA HMIS
VOC: <15 g/L Health 1 Flammability 2
Flash Point: 150º Reactivity 0 Protection B
DISCLAIMER: Since manufacturer has no control over handling, use or storage, no guarantee expressed or implied is offered. Eagle IFP Company warrants the product to be free of
defects and will replace or refund the purchase price of said products proven defective. Labor cost and/or other consequential damages are not covered by this warranty. Responsibility
for claims of any kind is strictly limited to the purchase price of the product. The suitability of the product for any extended use shall be solely up to the user.