MSDS

Section IV – Fire-Fighting Measures
Flash Point: N/A
LEL: Not Determined
UEL: Not Determined
Flammability: Non-flammable
Extinguishing Media: Dry chemical, foam or CO2
Unusual Fire or Explosion Hazards: Hydrogen gas may form explosive mixture in the air. At high
temperatures toxic corrosive fumes of anhydrous gas may be emitted.
Hazardous Combustion Products: hydrogen chloride and oxides of copper
Fire-Fighting Instructions: Do not release runoff from fire control methods to sewers or waterways.
Fire-Fighting Equipment: Because fire may produce toxic thermal decomposition products, wear a self-
contained breathing apparatus (SCBA) with a full face-piece operated in pressure-demand or positive-
pressure mode.
Section V – Stability and Reactivity
Stability: Deep Stain is stable at room temperature in closed containers under normal storage and handling
conditions.
Polymerization: Hazardous polymerization cannot occur under normal temperatures and pressures.
Chemical Incompatibilities: Contact with common metals, including aluminum or magnesium, may
produce hydrogen which may form explosive mixtures in the air.
Condition to Avoid: Heat, open flame, reactive metals, and strong oxidizers.
Hazardous Decomposition Products: Thermal oxidative decomposition of Deep Stain can produce toxic
and hazardous gases including fumes of hydrogen chloride and oxides of copper.
Section VI – Health Hazard Information
Potential Health Effects
Primary Entry Routes: Inhalation, skin
Target Organs: None Known
Acute Effects
Inhalation: Burning sensation in the throat, coughing and choking
Eye: May cause severe irritation, impairment and permanent damage
Skin: Severe irritation, inflammation, ulceration, necrosis and burns with permanent damage.
Ingestion: Burns of the mouth, throat, esophagus and stomach with consequent pain, uneasiness, nausea,
vomiting, diarrhea, chills and intense thirst.
Carcinogenicity: IARC, NTP, and OSHA do not list Deep Stain as a carcinogen.
Medical Conditions Aggravated: Inhalation of fumes may aggravate existing lung problems.
Emergency and First Aid Procedures
Inhalation: Remove to fresh air. Administer artificial respiration if necessary. Call a physician.
Eye Contact: Flush with water for 20 minutes lifting upper and lower eyelids occasionally. Continue
irrigation with normal saline until pH returns to normal. Call a physician.
Skin Contact: Remove contaminated clothing and rinse the affected area for at least 20 minutes.
Thoroughly wash with soap and water until no evidence of the chemical remains. For chemical burns,
cover with proper dressing and bandage. Call a physician.
Ingestion: Drink large amounts of water or milk to dilute the acids. If vomiting persists, take fluids
repeatedly. Ingested acid must be diluted 100:1 to render harmless to tissues.
Page 2 of 4