MSDS

1
MATERIAL SAFETY DATA SHEET
Complies with OSHA’s Hazard Communication Standard, 29 CFR 1910.1200
REVSION: 5/23/2012
SECTION I-MANUFACTURER
NAME: EAGLE I.F.P. COMPANY 24 Hour Emergency Telephone No.
P.O. Box 100431 INFOTRAC
Nashville, TN 37224 1-800-535-5053
Tel: [phone]
SECTION II-PRODUCT IDENTIFICATION
IDENTITY: Eagle Chattahoochee Sealer
HMIS CODES: H F R P
1 2 0 B
SECTION III-COMPONENTS
WEIGHT % CAS # OSHA PEL(TWA) ACGIH(TLV-TWA)
Acrylic Polymer 25 Proprietary None Established None Established
Mineral Spirits* 75 8052-41-3 500 ppm 100 ppm
SECTION IV-PHYSICAL/CHEMICAL CHARACTERISTICS
Specific Gravity (H20=1): 0.83 Flash Point(TCC): 105° F
Vapor Density (Air=1): 4.9 Odor: Typical hydrocarbon
Material V.O.C.: <700 g/l Appearance: Clear liquid
SECTION V-FIRE AND EXPLOSION HAZARD DATA
Flash Point (TCC): 105° F
Flammable Limits(% volume in air): LEL=1.0 UEL=6.0
Extinguishing Media: Dry chemical, CO
2
, foam
Special Fire Fighting Procedures: Evacuate area and fight fire from a distance. Firefighters wear NIOSH
approved self-contained breathing apparatus. Cool containers exposed to fire with water. Vapors are heavier than
air and may travel along the ground to distant ignition sources.
SECTION VI-REACTIVITY DATA
Reactivity: Stable
Conditions to avoid: Prevent vapor accumulation. Avoid heat and flames.
Incompatibility (Materials to Avoid): Strong oxidizers.
Hazardous Decomposition (Byproducts): Carbon monoxide and carbon dioxide.
Hazardous Polymerization: Should not occur.