MSDS

2
SECTION V - FIRE FIGHTING MEASURES
Flash Point: None
Flammable Limits: Not available
Auto-ignition Temp: Not available
Extinguishing Media: Carbon Dioxide, Dry Chemical, Foam, Water Fog
Special Fire Fighting Procedures: Cool and use caution when approaching or handling fire-exposed
Containers. Fire fighters should wear self-contained breathing
apparatus and protective clothing.
Unusual Fire/Explosion Hazards: No significant hazard. Contained may burn and leak in heat of fire.
SECTION VI - ACCIDENTAL RELEASE MEASURES
Spill or Leak Procedures: Absorb spillage in suitable inert material. Sweep or scrape up and containerize.
Rinse affected area thoroughly with water.
SECTION VII - HANDLING AND STORAGE
Handling/Storage: CAUTION: Avoid contact with eyes. Avoid prolonged contact with skin.
Wash thoroughly after handling. Keep containers closed when not in use. Store in
a cool, dry place with adequate ventilation.
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls: Good general ventilation should be sufficient to control airborne levels.
Respiratory Protection: Use appropriate respiratory protection to prevent overexposure.
Skin Protection: Suitable gloves, boots, and apron
Eye/Face Protection: Chemical splash-proof goggles
Other Protective Measures: In case of spills, see Section 6
SECTION IX - PHYSICAL AND CHEMICAL PROPERTIES
Color: Cloudy Odor: Light Ammonia
Physical State: Liquid pH: 8.5 – 9.5
Solubility (Water): 100% Specific Gravity, g/ml: 1.01
Total VOCs, wt%: 6.8
SECTION X - STABILITY AND REACTIVITY
Stability: Stable
Stability-Condition to Avoid: None known
Hazardous Decomposition Products: Produces normal products of combustion
Hazardous Polymerization: Will not occur
Conditions to avoid: None known