Product Manual

HEARING PROTECTION
Always wear ANSI approved hearing protection when using this tool.
EYE PROTECTION
ALWAYS wear approved OSHA and ANSI Z87.1-2003 safety goggles when operating this tool. Be
considerate of bystanders when using this tool, and warn them accordingly.
TIRES - EXPLOSION RISK
Before using the bead seating tool on a tire or inflating any tire:
· ALWAYS inspect the tire and wheel for damage.
· ALWAYS ensure that any locking ring is secured in place.
· ALWAYS use a safety cage for inflating large tires or tires at high pressures.
· DO NOT over inflate the tire.
· DO NOT inflate damaged tires.
Check the tire blaster tool regularly for damage or signs of wear, and ensure that the tank is inspected
inside and out on a yearly basis. NEVER TIGHTEN OR LOOSEN FITTINGS WHILE CYLINDER
IS CHARGED!
Items to check for:
· Make sure there are no cracks in the tank or fittings.
· The barrel is not damaged or bent and there are no obstructions to the barrel.
· NEVER tighten or loosen fittings while the cylinder is charged.
DRAINING
Drain the tire blaster tool regularly. To do this, hang the tire blaster up with the barrel positioned
downward and open the air release valve.
Page 6
OPERATION continued
MAINTENANCE