Instruction manual

User’s Manual

Highlight the box beside To and press the button to toggle between On and Off. When set to

Off, you can enter a specific Date and Time. When set to On, the search will be from the last

recorded image.

Highlight the box beside Check Time Overlap and press the button. It toggles between On

and Off. You will only be able to turn the Check Time Overlap on or off if a user-defined date

and time is set to From and To. If the DVR’s date and time have been reset, it is possible for the

DVR to have more than one overlapping start and stop time. When set to On, you will be asked

to select one of the overlapping start and stop time. When set to Off, the DVR will display search

results from all start times to all stop times.

Highlight the box beside Alarm-In and press the button. You can select the alarm inputs that

you want to include in your search.

Highlight the box beside Motion and press the button. You can select the cameras for which

you want any reports of motion detection.

Highlight the box beside Video Loss and press the button. You can select the cameras for which

you want any reports of lost video.

Highlight the box beside Video Blind and press the button. You can select the cameras for which

you want any reports of blind video.

Highlight the box beside Text-In and press the button. You can select the text-in devices which

you want any report of text input.

Highlight the box beside Record Channels and press the button. You can select the cameras

that you want to search for any reports of event recorded data. The DVR will display the events

(not the camera channels) that occurred and that also are recorded on the camera channel that you

selected. If you do not select a camera channel in this field, the DVR will search events that are

not associated with cameras.

You can also toggle On and Off self-diagnostic events as part of your search. The choices are:

y Panic Record

y Check Recording

y Check Alarm-In

y Disk Almost Full

y Disk Bad

y Disk Temperature

y Disk S.M.A.R.T.

You can search video from the first to last

recorded images, or you can set the start and stop

times and dates.

Highlight the box beside From and press the

button to toggle between On and Off. When set

to Off, you can enter a specific Date and Time.

When set to On, the search will be from the first

recorded image.