Instruction manual

4- & 8-Channel Digital Video Recorder

Highlight the desired box under the PTZ heading, and press the button. A list of PTZ presets

appear. Select the preset position for each PTZ camera, where you want PTZ cameras to move

to whenever the DVR detects an input on the associated alarm input.

Motion Detection

Highlight Motion Detection in the Event menu and press the button. The Motion Detection

setup screen appears.

You can define the area of the image where you want to detect motion; e.g., a doorway. Highlight

the box under the Zone heading, and press the

button. The Motion Detection Zone screen

displays.

You can toggle the entire list On and Off by highlighting Notification

and pressing the

button. You can toggle the individual items On

and Off by highlighting that item and pressing the

button. Highlight

OK and press the

button to accept your changes.

NOTE: For the Notify action, the notify item you select should

be enabled in the Notification setup screen and the DVR should

be registered in the RAS (Remote Administration System).

Figure 47  Motion Detection Settings setup screen.

Your DVR has built-in video motion detection.

Video motion detection can be turned On or

Off for each camera.

Highlighting the box under the Sensitivity heading and pressing the

button allows you to adjust the DVR’s sensitivity to motion for

Daytime and Nighttime independently. There are five settings with

1 being the least sensitive and 5 being the most sensitive.