Instruction manual

User’s Manual

When the DVR is in the Time & Event mode, the DVR will follow the Time settings and the

icon displays. The DVR follows the Event settings and the

icon displays.

Highlight the box under the Channels heading and press the button to select which cameras

will be recorded. (Simple Mode Only)

NOTE: Day, Range and Channels that are not defined will use the setting values of the

previous schedule item.

NOTE: When more than two schedule items are registered in the same day and time range,

the DVR will follow the latest registered schedule item.

NOTE: When multiple events are detected at the same time from a specific channel, the

DVR will record event video with the high setting values if the ips, Quality and Dwell values

of events are different from each other. However, the ips will be reset to the supported

maximum value when the ips, Quality and Dwell are all set to the highest value. (Advanced

Mode Only)

Highlight the box under the heading and press the button to delete the recording settings.

You will be asked to confirm that you want to delete the settings.

Highlight Default… and press the button. The Default screen appears.

Highlighting boxes under Quality and pressing the button allows you to set the recorded image

quality for Time and Event recording. You can select from: Very High, High, Standard and

Basic. Highlighting boxes under Dwell and pressing the

button allows you to set the length

of time you would like to record for the associated event. (Advanced Mode Only)

Figure 42  Schedule – Settings (Advanced Mode)

setup screen.

Highlight the box under the Settings heading

and press the

button to define the recording

settings. You can set the ips and Quality (ips,

Quality and Dwell for Advanced Mode setup)

of the recording for any modes you set up in the

Mode column. If you do not set the ips, Quality

and Dwell in the Settings column, the DVR

will follow the default settings. See below for

details.

NOTE: Descriptions of the Record icons in

the Type column are as follows:

Time-lapse (Time) Alarm-In

Motion Video Loss

Video Blind Text-In

Highlighting boxes under ips and pressing the button

allows you to set the images per second for Time and Event

recording. You can select from 0.10 to 30.0 images per

second.