Instruction manual

4- & 8-Channel Digital Video Recorder

< Simple Mode >

< Advanced Mode >

Figure 41  Schedule setup screen.

You can program the DVR to record only during certain times based on time, day of the week,

and holidays. The smallest time segment you can use is 15 minutes.

Highlighting Schedule On and pressing the button toggles between On and Off. In the Schedule

On mode, the DVR records video based on the schedule established in the Schedule screen. When

turning Schedule recording Off, you will be asked to confirm your decision, and

displays at the

top-left corner of each camera screen. Panic recording will function even when Schedule is turned

off.

displays during panic recording.

Highlight the Schedule Mode box and press the button. You can select between Simple

Mode and Advanced Mode. Selecting Advanced Mode allows you to set up individual recording

schedule for each event.

Highlight the + and press the

button to add a schedule item.

Highlight the box under the Day heading and press the button to change the days that the scheduled

recording will take place. Choose from: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.

Highlight the box under the Range heading and press the button to change the time range that

the scheduled recording will take place. The smallest time segment you can use is 15 minutes.

Highlight the box under the Mode heading and press the button to change the recording mode

that will be used. Choose from: No Record, Time, Event and Time & Event. (Simple Mode

Only)

When the DVR is in the No Record mode, it will not record during the preset day and time range

as long as the

PANIC button is not pressed. Use the No Record mode when you do NOT want

the DVR to record during certain times.

When the DVR is in the Time mode, the icon displays at the top-left corner of the screen.

The DVR will record and displays the

icon at the top-left corner of the screen during the

scheduled times.

When the DVR is in the Event mode, the red icon displays at the top-left corner of the screen.

The DVR will record and displays the

icon at the top-left corner of the screen when any event

occurs. When the DVR is in the Pre-Event recoding mode, the yellow

icon displays when

there is no event, and the DVR is not recording. When the DVR is in the Pre-Event mode, the

red

and display when any event occurs and the DVR starts recoding.