Instruction manual

User’s Manual
34
The Range box allows you to set the time that the alarm schedule will be active in 15-minute
increments from 00:00 to 24:00.
The Mode box allows you to set how the alarm reacts during the scheduled time. When set to On,
the Alarm-Out is active during the scheduled time. When set to Event, the Alarm-Out is only
active when there is an Event during the scheduled time.
The Alarm-Out box allows you to select between Alarm Output and Beep (DVR’s internal buzzer).
The box allows you to delete an alarm output schedule. You will be asked to confirm whether
or not you really wish to delete the schedule.
Display
Highlight Display in the Devices menu and press the button. The Display screen allows you
to select what information will be displayed on the monitor.
y Remote Control – The icon
displays when the DVR can be controlled by the infrared remote control.
y Zoom – The icon
displays on the enlarged video.
y Network – The icon
displays when the unit is connected to a network via Ethernet. The icon
displays
when audio communication is available between the DVR and a PC running RAS via Ethernet.
y Freeze & Sequence – The icon
displays while in the Freeze mode, and the displays while in the
Sequence mode.
Figure 33  Alarm-Out Schedule setup screen.
You can add and edit alarm output schedules
on this screen. Highlight the + and press the
button to add a schedule. Highlighting the
boxes under the Column heading and pressing
the
button allows you to edit the information
in those boxes.
The Day box allows you to select the days that
the alarm schedule will be active. The choices
are: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F,
Hol and All.
Figure 34  Display OSD setup screen.
Highlighting an item and pressing the button
toggles that item On and Off. When an item is
On, there is a checkmark in the box beside it.
The following items can be turned On or Off: