Instruction manual

4- & 8-Channel Digital Video Recorder
31
NOTE: This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/).
Highlight the box beside Sender and enter the sender’s e-mail address. Use the virtual keyboard
to enter the e-mail address.
NOTE: The e-mail address must include the “@” character to be a valid address.
Highlight the box beside Recipient and enter the recipient’s e-mail address. Use the virtual
keyboard to enter the e-mail address.
Highlight the Test box and press the button to test emailing with the current settings you made.
Highlight the Callback tab, and the Callback setup screen displays.
Devices Setup
Figure 28  Devices menu.
Camera
Highlight Camera in the Devices menu and press the button. The Camera setup screen appears.
Highlight the box beside Authentication and press the button. An
Authentication screen appears.
Highlight Use and press the button to toggle between On and Off.
Highlight the box beside User/Password and press the
button.
A virtual keyboard appears allowing you to enter the user ID and
password.
Figure 27  Notification Callback setup screen.
Highlight LAN and press the button to
toggle between On and Off. When LAN is
turned On you can change the IP addresses.
Highlight the IP Address box that you want to
change and press the
button. Use the arrow
buttons to enter the IP address of the computer
you want contacted during an event. You can
enter up to five IP addresses.
Highlight the box beside Retry and enter the
number of times you would like the DVR to try
contacting the computer. You can select from
1 to 10 retries.