Instruction manual

4- & 8-Channel Digital Video Recorder
25
Shutdown
Highlight Shutdown in the System menu and press the button. The Shutdown screen displays
asking you to confirm whether or not you want to shut the system down.
Figure 19  Shutdown screen.
Network Setup
Figure 20  Network menu.
Network
Highlight Network in the Network menu and press the button. The Network setup screen
displays.
Highlight the box beside Remote Watch – Quality and press the button. You can select the
Quality from: Very High, High, Standard and Basic. Press the
button to set the Quality.
NOTE: The higher Quality settings require higher Transfer Speed settings. The transfer
speed you set is the maximum speed. Depending on the network environment, this speed
may not be achieved.
The DVR supports two-way audio communication between a local system and a PC running RAS.
Highlighting the box beside Remote Audio Channel and pressing the
button allows you to
select the audio channel that sends audio to the remote site. Selecting Select From RAS will
send audio of the channel selected from RAS.
After selecting Shutdown and pressing the button, a screen
will appear telling you when it is safe to disconnect power.
Figure 21  Network setup screen.
Highlight the first box beside Remote Watch –
Transfer Speed. Press the Up and Down arrow
buttons to set the Transfer Speed from 50Kbps
to 100Mbps.
Highlight the second box beside Remote Watch
– Transfer Speed. You can select the unit of
measure for the transfer speed between: bps and
ips. Press the
button to set the transfer speed.
NOTE: The local recording speed might be
affected by various network bandwidth
(Transfer Speed) conditions.