Instruction manual

4- & 8-Channel Digital Video Recorder

y Covert Camera Setup – The user can establish all Covert Camera settings on a local system or a PC

running RAS.

y Record Setup – The user can establish all Record settings on a local system or a PC running RAS.

To add a User, highlight the + User… box and press the button.

A virtual keyboard appears allowing you to enter the User Name.

Enter the name and assign the User to a Group and password. You

can use camera buttons 1 to 8 on the front panel to assign the

password. The password can be up to 8 digits. You will be asked

to confirm the password.

NOTE: In addition to using the front panel buttons or the infrared remote control, you can

use the virtual keyboard to assign the password. To display the virtual keyboard click the

button using the mouse (not supplied).

Highlighting the box beside Auto Login allows you to select a User to be automatically logged

in when the DVR is powered up. It can also be set to never automatically login a user.

Highlighting the box beside Auto Logout allows you to select from a list of times that the user

will be automatically logged out. The options are: Never, 1 min., 3 min., 5 min., 10 min., 15 min.,

20 min., 25 min., 30 min. and 1 hr.

Wizard

Highlight Wizard and press the button. The Setup wizard screen appears. The Setup wizard

guides you through configuring the system for basic operation.

NOTE: This Setup wizard screen can only be accessed when logged on as the admin user.

Figure 16  Setup wizard screen.

Select either Quick wizard or Network wizard

and select the Next button to start the selected

setup wizard.

NOTE: Selecting the Cancel button

throughout the screens exits the Setup

Wizard without saving your changes and

returns to the main setup screen.