Instruction manual

User’s Manual
16
To export the system log information, connect the USB
device to the DVR. Highlight Export… and press the
button.
Highlight the box beside File name and press the button. A virtual keyboard allows you to
enter the file name. Selecting Export will save the log information in .txt file format on the USB
device.
NOTE: When opening the saved .txt file, setting to the proper character encoding and using
fixed width fonts will be required to read the file properly.
The box beside Recorded Data – From / To displays the time information of recorded data.
Highlighting Clear All Data… and pressing the button will clear all video data. You will be
asked to verify that you wish to clear all data before the DVR erases the video data. Clear All
Data… will not clear the System Log.
Date/Time
Highlight Date/Time in the System menu and press the button. The Date/Time setup screen
appears.
The System Log screen lists system activities
(up to 5,000 from the latest) that have occurred
along with the time and date. The
icon will be
displayed in the last column for system activities
of the remote site. You can scroll through the
log pages by using the Up and Down arrows, or
you can go directly to a log page by entering the
log page number in the box at the bottom left of
the screen. Highlight Close and press the
button to exit the screen.
Figure 10  Date/Time setup screen.
Highlight the first box beside Date and press
the
button. The individual sections of the
date will highlight. Use the Up and Down
arrow buttons to change the number. Use the
Left and Right arrow buttons to move between
month, date and year. Once you have the correct
date, press the
button.
Highlight the Format box beside Date and press
the
button. Select from the three available
date formats and press the
button to save your
selected format.