Instruction manual

User’s Manual

PTZ Button

Pressing the PTZ button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to control properly

configured cameras.

Enter Button

The (Enter) button selects a highlighted item or completes an entry that you have made during

system setup. This button is also used to enter the Cameo mode in the Live Monitoring mode or

Search mode (8-ch Model Only).

Alarm Button

Pressing the ALARM button resets the DVR’s outputs including the internal buzzer during an alarm.

PTZ Control Buttons

While in the PTZ mode, the PRESET buttons are used to save Presets and load a Preset View, the

ZOOM buttons are used to Zoom In and Zoom Out, and the FOCUS buttons are used for Near

Focus and Far Focus.

Back Up Button

Pressing the BACK UP button allows you to copy video clips.

Calendar Button

In the search mode, pressing the CALENDAR button displays the Calendar Search screen.

Turning on the Power

Connecting the power cord to the DVR turns on the unit. The unit takes approximately 60 seconds

to initialize.

Initial Unit Setup

Before using your DVR for the first time, you will want to establish the initial settings. This

includes items such as time and date, display language, camera, audio, remote control, record

mode, network and password. Your DVR can be set up using various screens and dialog boxes.

Throughout the screens you will see . Highlighting the and pressing the (Play/Pause)

button gives you the opportunity to reset that screen to its default settings. After you are finished

with any setup screen, you can highlight Save and press the

button to save the changes and

exit the screen. If you do not wish to save the changes, highlight Cancel and press the

button

to exit the screen.