Specifications

control ports. Attach the lens control cable from your lens to the connector on the rear of the pan
tilt head. If you are using a C mount lens with auto iris, and your camera supports auto iris opera-
tion, attach the four pin link from your camera body to the four pin connector on the lens body.
If using the optional 15 pin pass thru cable for component, RGB, or Y/C signal output, attach it
between the camera body and the 15 pin socket on the rear of the PT-101 head. You must supply
your own breakout cable to attach to the 15 pin connector on the base of the pan tilt head, or buy
a specially made one direct from Hitachi. Several configurations of cable are available depending
upon your needs.If making your own cable, the pin outs are shown in a diagram in the Hitachi
camera manual.