User Manual

USER GUIDE
78
6.18 Configuring the Optional EagleEyes™ FPV Station
Please refer to the latest EagleEyes online manual (found on the Support tab on our website) for instructions
on configuring the EagleEyes with the MicroVector.
When coupled with the MicroVector, the EagleEyes FPV ground station provides the following features, which
can be configured and controlled directly from the MicroVector on-screen
menus:
 Receiver Diversity - when you connect two NTSC or PAL audio/video
receivers (of any frequency), the EagleEyes picks the better signal at
any given time, which can greatly reduce video fades and improve your
FPV experience.
 Antenna Tracking - the EagleEyes can control most pan/tilt antenna
trackers, such as the ReadyMadeRC™ tracker. The EagleEyes uses
telemetry received from the MicroVector to point the antenna toward
the model.
 Telemetry – Telemetry data from the MicroVector is sent via your
video transmitter to your EagleEyes, where you can visualize your
flight on your laptop in real time, using the MicroVector software.
Note: Antenna Tracking and Telemetry are NOT available when the MicroVector is operating without a
camera!
 Four Channel A/V Distribution - The EagleEyes has four buffered video/audio outputs for connecting
multiple sets of goggles and monitors at the same time.
 PowerPanel LCD Display support – When the optional PowerPanel™ LCD display is connected to the
EagleEyes, the model’s present GPS position is automatically displayed via the MicroVector telemetry.
With the LCD, the last known GPS position is remembered and displayed, in case you lose contact with
your model.