User Manual

USER GUIDE
27
numbers on the MicroVector servo connector label (1 = M1, etc.). For quadcopters and hexacopters the
curved arrows indicate the correct motor rotation.
For tricopters, the motor rotation directions are arbitrary. Also, the yaw servo MUST be digital!
Tricopter rudder control of the yaw servo is initially disabled when the throttle is at its off position. In
order to test yaw, you will need to increase the throttle stick slightly with the system disarmed.
For Hexacopter Y6 and IY6, the blue motors in the figures below are ON TOP.
For fixed wing, if you have dedicated flaps, they do not connect to the MicroVector. Connect the flaps
directly to your receiver channel that is controlled by the desired flap switch.