User Manual

USER GUIDE
108
A: The MicroVector attempts to maintain this ground speed during waypoint navigation and RTH.
B: The MicroVector attempts to honor this climbrate during waypoint navigation and RTH.
C: The MicroVector attempts to honor this descent/sinkrate during waypoint navigation and RTH.
Note: This setting is NOT used during Autoland. Presently, Autoland speed is hardcoded to
1.5FPS/50cmS
D: If your fixed wing model is navigating waypoints or returning to home at a speed lower than specified
ground speed (from the GPS), the MicroVector will use the 'Climb' throttle setting instead of the 'Cruise'
throttle setting you specified in the wizard. This is useful if you are navigating in high wind.
E: This circling radius is used when no circling radius/direction is specified in individual waypoint
commands, as well as for RTH.