Installation Guide

Step 8
30
Back Wall Assembly, cont’d
1A
5
4B
8.2
3A/3B
4B
8.3
1D/1E
1A
7A
5
26
8.4
3A/3B
7A
5
8.6
5
1D/1E
3A/3B
8.5
3A/3B
5
8.1
Slide (5) Screw 5 into the channel of
Vertical Wall Support 3A and 3B.
Attach Corner Vertical Support 1A to
Horizontal Beam 4B using (1) Screw Set 5.
Repeat on opposite end with remaining
Vertical Support 1A.
Attach Vertical Supports 3A and 3B to
Horizontal Beam 4B using the lowest
Screw 5 inserted in step 7.1.
Attach Diagonal Roof Beams 1D and 1E and
Horizontal Beam 7A to both Vertical Supports
1A using Bracket 26 and (4) Screw 5 Sets as
shown.
Attach the top of Vertical Supports 3A
and 3B to Diagonal Beams 1D and 1E using
the top Screw 5 from Step 7.1.
Attach Horizontal Beam 7A to Vertical
Supports 3A and 3B using the (2) Screw
5 that are second from the top.
5