Installation Guide

29
1A
5
5A
9.5
27-1
29
5
2A/2B
9.6
5
9A
1B/1D
1C/1E
9.7
3A/3B/3C
29
5
27-1
9.4
Joining the Walls, cont’d
Secure Back wall Assembly and Sidewall
Assemblies to the Foundation Assembly
by removing the required nuts and
washers, installing (6) Clip 29, and
replacing the nuts and washers as shown.
Secure the Front Wall Assembly to the
Foundation by removing the nut and
washer at the bottom of Diagonal Brace
7, 2A and 2B. Install (2) Clip 29 and
reinstall the washers and nuts.
Attach Roof Ridge Beam 9A to Diagonal
Roof Beams 1B, 1C, 1D, and 1E using (4)
Screw 5 sets.
Remove the nut and washer from the
lower corner, install Clip 29 to attach the
corner of the frame to the foundation.
Repeat on all lower corners.
Step 9
31