Owner manual

SECTION 5.0 SPECIFICATIONS
CONSTRUCTION: Load Cell: Stainless Steel
Trunnion Castings: Aluminum
Axles & Hardware: Stainless Steel
Rollers: UHMW Plastic
Shock Pads: Fabcel 300 ®
Conduit & Fittings: PVC
Junction Box: Cast Iron
FINISH: Trunnion Castings: Acrylic Paint
Junction Box: Clear Acrylic Paint
CAPACITY: 4000 Lb
SAFE OVERLOAD: 200% of Rated Capacity.
ULTIMATE OVERLOAD: 300% of Rated Capacity.
NOMINAL OUTPUT: 0.5 mV/V at full scale
EXCITATION VOLTAGE: 5 to 15 VDC
OPERATING ACCURACY: 0.5% of Capacity.
REPEATABILITY: 0.2% of Capacity.
LOAD CELL: Stainless Steel strain gage, hermetically sealed,1000 Ω.
TEMPERATURE: 0 to 150 Degr. F.
HOOK-UP CABLE: 15' of 4 conductor, color coded,shielded cable. PVC jacket.
SECTION 6.0 SPARE PARTS LIST
PART DESCRIPTION MODEL/CAPACITY
Load Cell TH-CM / 4,000 lbs F.S.
Roller M10246
Roller Retaining Ring WST-75
Shock Plate M10250
Shock Pad M10249
Shock Disk M10131
Load cell Summing Board WTSJB