User`s guide

37 EEDVR
®
www.EagleEyeDVR.com
: The image on the left shows the status of the cameras being
displayed and recorded. The solid lights on the top row indicate
that images are being transmitted from the camera(s). The
blinking lights on the top row, if any, indicate that the camera(s) are enabled in the EEDVR DVR Settings, but no
signal(s) are being delivered for some reason, such as no camera connectivity or weak signal. The solid lights on
the bottom row indicate that the camera is being recorded.
: This displays the status of the 4 digital outputs. A pressed tab indicates that particular relay is
active; a released tab indicates that the relay is inactive.
: Backup and Network Connection icons. Move cursor over the image to view the IP address of net client.
: "Brightened" icons indicates backup execution or active connection.
: The numbers and bars on the bottom indicate the total number of volumes
and the number of volumes being used. Number of days for currently
recorded data is displayed at the end.
: Displays current version of the software and the number of channels available in the
system. From the software version, change of the first two digits indicates major change in software, next two
digits indicates minor changes, and the last digit letter shows the type of the board installed on the system.
: Shortcuts for Search, Setting, and Smart Search program.
: Exits the Main program.
: Press to open P/T/Z and image control menus.
: Press to open the login dialog – requires a valid username and password.
: Click "CAMERA" to use the CAMERA CONTROL options. Click "IMAGE" to
use the IMAGE CONTROL options for tuning the image color.