User`s guide

23 EEDVR
®
www.EagleEyeDVR.com
- Remove from network display: If selected, current camera will not be displayed on remote connections.
(Note: “Hide camera (Display)” also hides images from being displayed on TV-Out. “Remove from
CCTV display” feature is not supported under H.264 Series board.)
• Compress format & rate: Change the compression rate. (Moving bar to the left decreases the size of the
image file, but at the same time quality of image will degrade.)
• Sound Setting: Select an audio port to record along with the images of current camera. “Sound recording”
option under System setup must be configured first. It is allowed to record the same audio channel on
multiple cameras.
• Pre & Post alarm recording: Applies only if “Motion” or “Sensor” is selected in 'Scheduling' menu.
- Pre: Number of recorded frames prior to Motion detection or Sensor trigger.
- Post: Number of recorded frames after Motion detection or Sensor trigger.
• Event notification
- Video loss - Notification: Choose event for Video Loss. (Refer to 5.7. Event Setup)
All changes will only be applied if “Save & Close” or “Apply” button is clicked.
What is a Frame? Frame is a single still image captured by the camera. When a recording is
played, the frames that were recorded and captured by the camera are played at a fast speed,
making the recording seem like a flowing motion picture.