User`s guide

21 EEDVR
®
www.EagleEyeDVR.com
- Allow remote connections: Allow users to log on the system from a remote location through the network.
-- Code: Give a unique combination of case-sensitive
alphanumeric characters, maximum of 10 characters.
This field is required for IP Server.
-- Bandwidth Control: Adjust bandwidth depending on the
connection type. It is recommended to reduce the bandwidth in
order to increase the transmission speed. However, the quality
of the images will degrade. This control is not available on
H.264 Series.
-- Remote notification of events: Enable and assign remote
client
information to be notified. The system is capable of sending
a
warning message to the remote client when motion or
sensor
is detected. The remote client is notified through sound, and
it
will popup if running and minimized. In order to notify the
remote client, make sure to configure the IP address or
Code
in “IP / Code”.
--- Method: Select between TCP/IP and Server (Server when
using IP Server)
--- IP / Code: Give IP address or Code (Code when using IP
server) of remote client to send Notification.
-- Use IP Server: In case of using IP server, check the box. Since IP Server uses Code to identify DVR
system rather than its IP address, it is possible to connect to a DVR system that has a dynamic IP
address (Code name must be unique for each DVR system.)
--- IP Server: IP address of system in which IP Server program is running (Server must use static IP address.)
--- Notify interval: Update the IP address of current DVR system on the IP server once in every time interval.
-- Prevent IP: Blocks IP addresses registered on the block list.
--- Add, Delete, Modify: Add the IP address entered on “IP Add” field, delete or modify the selected IP address
of the list.
- Internal program CD burn: Use CD
Burn Program in DVR Program
(Windows XP required).
- External program CD burn: ClickBrowse” button to choose external CD Burn Program (CD-RW). CD burning
program will start once CD Burn button is selected in Search program.